F.A.Q

MS POLYMER is much more elastic and is more suitable for surfaces that crack quickly or expand. However, it is not suitable for heavy pedestrian traffic once applied. It is available in different colors.

SB SUPER COMPONENT, on the other hand, is elastic but not as much as MS POLYMER. It has a sandy texture and is suitable for heavy pedestrian traffic. It is also available in different colors.

Both materials provide 100% waterproofing when applied correctly.

You can apply ISONEM LIQUID GLASS on tiles, ceramics, or similar surfaces. It is a transparent material with high UV resistance and provides 100% waterproofing when applied correctly.

⚠️ Preparation:

Before application, ensure that you update the grout lines and apply polyurethane-based mastic at corners and around drainage areas. Wait for the grout and mastic to fully dry before proceeding.

✅ Application:

Apply our product in two coats, with a 24-hour interval between each layer.

📌 Important:

• If applying after rain, the area must receive 5 days of sunlight before application.
• After application, ensure that the surface remains dry for at least 2 days to avoid exposure to rain.
• ISONEM LIQUID GLASS must not be applied on surfaces that have been in contact with silicone or silicone-based materials beforehand.

For thermal insulation, you can apply ISONEM THERMAL PAINT along with its appropriate primer on concrete. When applied correctly, it provides up to 40% thermal insulation and also ensures waterproofing with its supportive materials, depending on the surface.

⚠️ If there is a membrane under the concrete, make sure to install a ventilation chimney.

For more details, please contact our Regional Representatives.

For thermal insulation, you can apply ISONEM THERMAL PAINT after applying ISONEM ANTI RUST PRIMER on sheet metal or metal roofs.

For detailed application instructions, please contact our Regional Representatives.

After completing grout repairs on the tiles or ceramics in your bathroom, you can apply ISONEM LIQUID GLASS to the entire floor. It gives a shiny finish to the surface and ensures 100% waterproofing when applied correctly.

⚠️ Before application, make sure that no silicone or silicone-based materials have been used on the surface.

You can use ISONEM BD only on the grout lines.

⚠️ Important Application Notes:

• Make sure to apply it only on the grout lines without spreading onto the tiles.
• If it accidentally gets on the tiles, clean it immediately to prevent stains.
• If not wiped off immediately, it may leave marks on the tiles.

ISONEM LIQUID GLASS is a two-component material. The A and B components must be mixed together before application. The mixture has a working time of 60 to 90 minutes and must be used within this period. Once hardened, it cannot be restored.

✅ To avoid waste, you can divide the material into equal portions for the two-coat application.

Only mix the amount you will immediately apply, and store the unmixed portion for later use.

The mixing ratio of Component A to Component B is 7:1.

If you need to divide the material, use a precise measuring tool and mix 7 parts of Component A with 1 part of Component B in a separate container before application.

If the damp and moldy area is not exposed to water from an external source and the moisture and mold are caused by condensation, ISONEM MS 82 is the definitive solution. Once applied, the problem will not reoccur.

• No primer is required.
• Apply two coats.
• Wait at least 24 hours between coats.
• After the second coat, if desired, you can apply any breathable paint after at least 48 hours.

For thermal insulation, you can apply ISONEM THERMAL PAINT along with a suitable primer on your exterior facade.

ISONEM THERMAL PAINT is a thermal insulation material that replaces traditional cladding. It can be applied from both the inside or outside of the building.

✅ Advantages over traditional cladding:

• Provides thermal, waterproofing, and sound insulation, as well as fire resistance.
• Eliminates the disadvantages of traditional cladding.
• Easier to apply than conventional insulation methods.
• Does not damage the building and does not add extra load.
• More cost-effective than standard insulation systems.
• A new-generation thermal insulation paint developed with the latest technologies.
• Provides up to 40% energy savings.
• When applied to your building, it enables you to obtain an Energy Performance Certificate.

After completing grout repairs on the tiles or ceramics in your bathroom, you can apply ISONEM LIQUID GLASS to the entire floor. It gives a shiny finish to the surface and ensures 100% waterproofing when applied correctly.

⚠️ Before application, make sure that no silicone or silicone-based materials have been used on the surface.

It can be applied from both the interior and exterior.

✅ Advantages of Exterior Application:

Provides waterproofing.

Protects the building against fire.

Enables obtaining an Energy Performance Certificate.

Ensures up to 40% heat and energy savings.

✅ Advantages of Interior Application:

Prevents heat loss through walls.

Helps retain indoor heat levels.

Prevents moisture and condensation caused by temperature differences (if there is no external water leakage).

After applying a suitable primer to your exterior walls, you can use ISONEM BE 99, our elastic exterior wall product, which is available in the color of your choice.

For more details, please contact our Regional Representatives.

Since holes are drilled into the building during the cladding process, water infiltration may occur from unidentified points.

For waterproofing, you can apply ISONEM BE 99 on the exterior wall along with a suitable primer.